Expert Electrician in Sarasota County, FL

Today, we successfully installed a whole home surge protection device, integrating a generator inlet and interlock kit. To accommodate the new setup, we installed two tandem breakers, freeing up space in the electrical panel. The installation was completed with a 50 amp generator inlet breaker. We will deliver the 50 amp 30 ft generator chord as soon as it is available. Our team ensured every step was executed with precision, providing you with reliable and efficient electrical solutions. Thank you for choosing us for your electrical needs.

I installed a generator inlet to ensure a safe and efficient connection for the generator. This involved mounting the inlet box securely and running the necessary wiring to the main electrical panel. I also installed an interlock kit to prevent backfeeding, ensuring that the generator would not power the home's electrical system while connected to the grid. This setup guarantees safe operation and prevents potential hazards. The installation was completed with attention to detail and adherence to all safety standards.

I successfully replaced the LED light driver, ensuring the new component was compatible with the existing system. I carefully removed the old driver, inspected the wiring for any damage, and installed the new driver securely. After confirming the new driver was functioning correctly, I tested the LED lights to ensure they were operating at full capacity. The job was completed efficiently, with attention to detail to maintain the integrity of the lighting system.

Panel replacement

I successfully replaced three outdated ballasts, ensuring the lighting system functioned optimally. Additionally, I replaced 19 light bulbs, restoring full brightness and efficiency to the area. Each ballast was carefully removed and a new one installed, followed by the replacement of each bulb to guarantee proper lighting. The job was completed efficiently, enhancing the overall lighting quality.

Today, I completed the installation of all previously invoiced electrical work, ensuring all components were properly set up and functioning. Additionally, I added secondary surge protection and replaced a GFCI in the garage to enhance safety and reliability. This comprehensive service aims to safeguard your home's electrical system. Thank you for choosing ResQmedics Electrical for your electrical needs. Our commitment to quality and customer satisfaction remains our top priority.

Today, we successfully installed a new electrical outlet by extending from an existing outlet. We carefully piped the wiring to ensure a secure connection and added a new electrical box in the desired location. The new GFCI receptacle was then mounted, providing enhanced safety and protection. The installation was completed efficiently, and all electrical systems are functioning correctly. Our team, Lucas and Ryan, ensured the job was done to the highest standards, reflecting our commitment to quality service.

I was tasked with installing a sophisticated chandelier in a living space. The job began with a thorough assessment of the ceiling to ensure it could support the chandelier's weight. I then proceeded to mount the fixture securely, making sure all electrical connections were safe and compliant with standards. After the chandelier was installed, I balanced and adjusted it to ensure it hung perfectly. Finally, I cleaned up the workspace and provided the client with a detailed explanation of the chandelier's maintenance and care.

Generator service.

Replace light bulbs

Home rewire

I successfully completed the task of replacing low voltage drivers. This involved identifying and removing the faulty drivers, ensuring that all connections were properly disconnected. I then installed new, high-quality low voltage drivers, making sure they were securely fastened and correctly aligned. Each driver was tested to confirm proper functionality and to ensure compatibility with the existing system. The process required precision and attention to detail to avoid any disruptions to the overall system performance. The replacement was completed efficiently, ensuring minimal downtime and maintaining the integrity of the electrical system.

Meeting about gate

4’ led tubes

I began by safely shutting off power to the main electrical panel. I removed the old breakers and replaced them with new CH style breakers. Each new breaker was securely installed, and I tested power flow to ensure proper functionality. I also corrected a double tap on a breaker by relocating one of the lines to an open space. All breakers were tested, and everything is working correctly. The job is complete and safe.

Today, I successfully installed a dedicated 20 amp GFCI circuit specifically for the lanai air conditioner, ensuring safety and efficiency. Additionally, I replaced a bathroom receptacle and a garage GFCI outlet, enhancing both functionality and protection. Each task was completed with precision and care, reflecting our commitment to quality service. Thank you for choosing us for your electrical needs.

Ceiling fan

Today, I meticulously replaced all carbon and smoke detectors throughout the home. Each detector was carefully removed, tested for functionality, and replaced with high-quality, reliable units. I ensured that all new detectors were properly installed and tested to confirm they were working correctly. This proactive measure enhances the safety and security of the home. Thank you for choosing our services for your electrical needs. We value your trust and look forward to serving you again. Best regards, Allen Toledo.

lighting fuxture

Repaired

We began by removing the old main electrical panel and sub panel. We replaced the sub panel with a Siemens sub panel and the main panel with a Siemens 200 amp main breaker panel. Both panels received grounding systems, and a surge protector was installed in the main panel. An emergency disconnect was added to the exterior. All installations were tested and are functioning correctly. Thank you for choosing us for your electrical needs.

Panel change out

Today, I replaced a carbon/smoke detector in the master bedroom. The existing wiring between the detectors was improper, and there was no control wire connecting them. Due to these issues, I decided to replace only the faulty detector. The remaining detector is defective and relies on a battery. I ensured the new detector was properly installed and functioning. Thank you for choosing our services for your electrical needs.

Generator

I successfully installed a new whole home standby generator, ensuring it was properly connected to the existing power infrastructure. The installation included running necessary gas lines, electrical connections, and setting up the automatic transfer switch. I conducted thorough testing to confirm the generator would seamlessly switch to backup power during outages. Safety checks were performed to ensure compliance with local regulations and manufacturer guidelines. The system was explained to the client, including operation and maintenance procedures. The job was completed efficiently, providing peace of mind with reliable backup power.